MotherBoard

Trade, sell, buy, lookin for love!!!
User avatar
Nocturnal
Multi Kill
Multi Kill
Posts: 313
Joined: Sun Oct 09, 2005 12:00 am
Location: USA
Contact:

MotherBoard

Postby Nocturnal » Thu Dec 28, 2006 7:24 pm

Here is a link to the MB I want to sell:
http://www.newegg.com/Product/Product.a ... 6813131540
Comes with box and everything else, I need $100 which includes shipping !
Image
User avatar
MikeAnime
Ultra Kill
Ultra Kill
Posts: 859
Joined: Sat Aug 27, 2005 12:00 am

Postby MikeAnime » Thu Dec 28, 2006 8:34 pm

why are ya selling this one off ? how does the SLI run both at 16x in sli ?
User avatar
Nocturnal
Multi Kill
Multi Kill
Posts: 313
Joined: Sun Oct 09, 2005 12:00 am
Location: USA
Contact:

Postby Nocturnal » Fri Dec 29, 2006 12:20 am

Im selling this one because I want a different MB. I run in SLI and want to run 16x instead of 8
Image
User avatar
MikeAnime
Ultra Kill
Ultra Kill
Posts: 859
Joined: Sat Aug 27, 2005 12:00 am

Postby MikeAnime » Fri Dec 29, 2006 12:34 am

so do i
User avatar
Nocturnal
Multi Kill
Multi Kill
Posts: 313
Joined: Sun Oct 09, 2005 12:00 am
Location: USA
Contact:

Postby Nocturnal » Fri Dec 29, 2006 12:36 pm

actually, I am not sure if I am selling this now.>>> http://www.xbitlabs.com/articles/mainbo ... xe_25.html

We have tested the new SLI-compatible platform from NVIDIA based on the nForce4 SLI X16 chipset. The chipset provides two full-width PCI Express x16 slots and was expected to increase the efficiency of the SLI technology which had been previously limited to PCI Express x8 + x8 configuration. However, we could not see any significant performance gain in any of the games we checked the new platform in.

The results suggest that today’s games do not transfer so much data across the PCI Express x16 interface that the increased number of PCI Express lanes gave any effect for a SLI graphics subsystem. The PCI Express x16 + x16 formula is excessive today and, moreover, the performance of the new chipset was lower than that of the ASUS A8N-SLI Premium mainboard which is based on the older chipset!

The explanation of the newer platform being slower comes from one architectural feature of the nForce4 SLI X16. To ensure high-speed communication between the chipset’s North and South bridges, NVIDIA had to reduce the width of the HyperTransport bus the chipset connects to the CPU with and to use two 8-bit channels instead of the ordinary nForce4’s two 16-bit channels there. The smaller bandwidth of the CPU-chipset link does not show up in games, but the performance of applications that actively use the system bus, like data archiving utilities for example, may suffer a lot. We are not even sure the nForce4 SLI X16 will offer any advantage in the next generation of PC games, despite its two full-width PCI Express x16 slots, because the narrow HyperTransport bus will probable be a bottleneck. Being the first chipset with the PCI Express x16 + x16 formula, the NVIDIA nForce4 SLI X16 is interesting and unique, but it is no better than the ordinary nForce4 SLI, at least in current applications.

As for the particular implementation of the platform, the ASUS A8N32-SLI Deluxe is a superb mainboard, free from any obvious drawbacks. Our only gripe is about the accessories which might be more generous for a “Deluxeâ€￾ model. The heat pipes may also make it difficult to install certain CPU coolers, but the total noiselessness of the mainboard’s cooling system makes up for this inconvenience. Generally speaking, it is a real trouble to design a SLI-supporting mainboard, especially based on a two-piece chipset, and ASUS did it just right. We think the ASUS A8N32-SLI Deluxe is currently the best foundation for a top-end SLI-compatible computer with an AMD Athlon 64 processor.
Image
User avatar
webheadtech
STOOL PUSHER
STOOL PUSHER
Posts: 175
Joined: Tue Dec 26, 2006 12:00 am

Postby webheadtech » Fri Dec 29, 2006 3:50 pm

i MIGHT be interested in Trading
are you interested?
i got a graphic card
256
mb gddR3 agp 8x/4x Radeon x 700 pro
video capture edition

the is brand new not been used,
how about yours?
it was tested on my MB tho but didnt work because i think it says it wont work for DDR2 Ram
so he installed one that did
and the guy left the graphic card in my cart at the store and i ended up with it free.

PM me if you are
then i want to check some spec on that MB if your interested
User avatar
Nocturnal
Multi Kill
Multi Kill
Posts: 313
Joined: Sun Oct 09, 2005 12:00 am
Location: USA
Contact:

Postby Nocturnal » Fri Dec 29, 2006 7:48 pm

what kind and model exactly is the card?
Image
User avatar
webheadtech
STOOL PUSHER
STOOL PUSHER
Posts: 175
Joined: Tue Dec 26, 2006 12:00 am

Postby webheadtech » Sat Dec 30, 2006 4:44 am

ATI

im going to have to pass on it because my cpu wont work on that motherboard.
i will sell the graphic card out right or see if you can get me a motherboard that will work with my other stuff,.
User avatar
Nocturnal
Multi Kill
Multi Kill
Posts: 313
Joined: Sun Oct 09, 2005 12:00 am
Location: USA
Contact:

Postby Nocturnal » Sun Dec 31, 2006 12:04 pm

ATI what? give me some details ??? Maybe a lin k
Image
User avatar
webheadtech
STOOL PUSHER
STOOL PUSHER
Posts: 175
Joined: Tue Dec 26, 2006 12:00 am

Postby webheadtech » Sun Dec 31, 2006 1:43 pm

Nocturnal wrote:ATI what? give me some details ??? Maybe a lin k


this> Radeon x 700 pro
its a AGP
there is no link because i dont have it advertise on the internet
webheadtech wrote:i got a graphic card
256
mb gddR3 agp 8x/4x Radeon x 700 pro
video capture edition

the box looks like this, i found the image on google image search
the dude told me that the R3 gives twice the speed
so if you have 256 your really getting 512 , not sure if thats true or not.
Image
User avatar
Nocturnal
Multi Kill
Multi Kill
Posts: 313
Joined: Sun Oct 09, 2005 12:00 am
Location: USA
Contact:

Postby Nocturnal » Mon Jan 01, 2007 11:07 pm

how much are you asking?
Image
User avatar
webheadtech
STOOL PUSHER
STOOL PUSHER
Posts: 175
Joined: Tue Dec 26, 2006 12:00 am

Postby webheadtech » Thu Jan 04, 2007 3:43 pm

Nocturnal wrote:how much are you asking?


make me a offer
a offer thats reasonable.
if i get my cam going ill show you some pic of it or any pic of it you want.

the offer will include you pay the shiping.

im out of Dallas Texas.

the payment will be by check or money order
and when it clears ill send it.

i think you can pay for damage shipping insurance
so it would be best for you to add that to the bill because im not reliable.
now if you get it and its not craked or smashed but it doesnt work at all
then you can return it to me and ill refund the money if i get it back the same way i sent it,
i will have it tested on a diagnostic machine and if its not working then ill refund your money,, but if you send it back because you didnt like how it worked then there will be no refund, i will show you the paper work on were i had it tested, or you tell me what electronic store you want me to take it to,
if its not working ill pay for the testing
and if the test shows its good then you will get the part back with a bill from having it tested..

its brand new i dont see why it wouldn't work
ill give you 1 week after you receive it to see if every thing is ok,

ill will write this down on paper and sign it to show you im lagit
and mail you a copy
User avatar
Nocturnal
Multi Kill
Multi Kill
Posts: 313
Joined: Sun Oct 09, 2005 12:00 am
Location: USA
Contact:

Postby Nocturnal » Thu Jan 04, 2007 6:13 pm

Just give me a price as to what you are loking to get out of it!
Image
User avatar
webheadtech
STOOL PUSHER
STOOL PUSHER
Posts: 175
Joined: Tue Dec 26, 2006 12:00 am

Postby webheadtech » Fri Jan 05, 2007 7:56 am

Nocturnal wrote:Just give me a price as to what you are loking to get out of it!


there going for a litte over $100 up to $150

so im going to say $50 bucks should be fare enough.

i dont buy in bulk or sale in bulk because im not no company and actually i dont sale.
you may find it cheaper then again you may not..

im not advertising it all over,so ill probaley have it for a while
User avatar
Bitch_Killer
Site Admin
Site Admin
Posts: 1555
Joined: Thu Aug 25, 2005 12:00 am
Location: Canada, Eh
Contact:

Postby Bitch_Killer » Sun Jan 28, 2007 1:34 pm

You still selling the board noc?
Image

WTF??

Return to “Classifieds”

Who is online

Users browsing this forum: No registered users and 2 guests